Home | Contact & Links | Customer Comments | Installation Instructions

Ultra Tour-Pak
Turn Signal Adapter

Now your Ultra Classic's Tour-Pak Stock Incandescent Bulb Tail Lights can do more!
With the addition of a Ride Time Technology Ultra Tour-Pak Turn Signal Adapter your Tour-Pak tail lights will flash with your turn signals!

  • Flashes the Tour-Pak tail lights with the turn signals
  • Fully Solid State
  • Works With both stock incandescent bulbs and LEDs
  • Increased visibility and safety
  • Compatible With Stock Flasher (TSM)
  • Compatible With Security Module (TSSM)
  • Sealed Against Moisture, Dust & Other Contaminates
  • Heavy Duty To Support Extended Duty - Parade & Escort Service
These small adapters, 1" x 1" x 1-3/4", are easy to install. They splice into the brake light wire that goes to your Tour Pak's tail lights. Add a wire from your turn signal circuit, and you have turn signals, running lights, and brake lights. The Tour Pak's tail lights will flash with the turn signal, go solid when the brake is applied and return to flash mode when the brake is released.
Ultra Tour-Pack Turn Signal Adapter

Ultra Tour-Pak
Turn Signal Adapter
$44.95

Ride Time products for easy wiring to the
turn signal circuit under the seat!
Quick-Connect Accessory and Trailer Adapter
Quick-Connect Wiring Harness
 
Home | Contact & Links | Customer Comments | Installation Instructions

©2007 - ridetimetechnology.com
Harley, Harley-Davidson, Tour-Pak, Electra Glide, Ultra, Ultra Classic, Classic, Road King, and other names or model numbers for Harley-Davidson motorcycles and products are registered trademarks of Harley-Davidson. Such names and designators are used for descriptive purposes only. Harley-Davidson does not make or endorse the use of Ride Time Technology products.